Skip to content
Pass Duke Elder
Textbook / Chapter 3 / Optics, refraction and visual science

Thin lenses, lens forms and transposition

Spectacle prescriptions are written in a compact code of sphere, cylinder and axis. This lesson explains where lens power comes from, how spherical, cylindrical and toric lenses differ, how to transpose a prescription and find its spherical equivalent, and why a lens changes its effect when it is moved towards or away from the eye.

8 minute read8 linked questions

Power and focal length

A lens is a piece of transparent material with at least one curved surface. Each surface bends light because of the change in refractive index across it, and a curved surface bends rays by different amounts at different heights, so that they are brought together or spread apart. A thin lens is one whose thickness is small enough to ignore, so its power is simply the sum of its two surface powers.

Parallel light entering a plus lens is brought to a point, the focal point. The distance from the lens to that point is the focal length. The power of a lens is the vergence it adds to light, and for parallel light arriving (zero vergence) the vergence leaving equals the power, so power and focal length are reciprocals.

F = 1 / fF is the power in dioptres (D), f the focal length in metres. A minus lens has a negative focal length.

Worked examples. A lens that focuses sunlight 25 cm away has F = 1 / 0.25 = +4 D. A +10 D lens has a focal length of 1 / 10 m = 10 cm. A -2 D lens makes parallel light diverge as if it came from a point 50 cm in front of the lens, so its focal length is -50 cm.

Surface power = (n2 - n1) / rn1 and n2 are the refractive indices before and after the surface, r the radius of curvature in metres. A steeper surface (smaller r) or a bigger index step gives more power.

Convex and concave lenses

A convex lens is thicker in the middle than at the edge. It adds convergence and has plus power. A concave lens is thinner in the middle. It adds divergence and has minus power. Most spectacle lenses are a meniscus shape, curved forwards on both surfaces, but the same rule holds: compare the centre with the edge.

Convex (plus)Concave (minus)
ShapeThick centre, thin edgeThin centre, thick edge
Effect on parallel lightConverges to a real focusDiverges from a virtual focus
Image of a distant objectReal and invertedVirtual, upright and smaller
Looking through it at a near objectMagnifiedMinified
Object seen through it when the lens is moved sidewaysMoves against the lens movementMoves with the lens movement
CorrectsHypermetropia, presbyopia, aphakiaMyopia
Convex and concave lenses compared

The movement test in the table is how an unknown lens is identified by hand. Its power is then found by neutralisation: lenses of known, opposite power are held against it until the movement stops. In clinic a focimeter does the same job and reads the power, the cylinder axis and any prism.

Combining thin lenses

Thin lenses in contact simply add. A +3.00 D lens placed against a -1.00 D lens behaves as a +2.00 D lens. This is why trial lenses can be stacked in a trial frame, and why a contact lens and the eye can be treated as one system.

Once two lenses are separated, the light changes vergence as it travels between them, so the powers no longer add exactly. The same idea explains vertex distance at the end of this lesson.

Spherical, cylindrical and toric lenses

A spherical lens has the same power in every direction and brings light to a point focus. It is written DS, for dioptre sphere.

A cylindrical lens is shaped like a slice cut from the side of a tin can. Along the length of the can the surface is flat and has no power. This direction is the axis. Across the can, at 90 degrees to the axis, the surface is curved and has full power. A cylinder therefore turns a point of light into a line, and the line lies parallel to the axis. It is written DC, for dioptre cylinder, with its axis in degrees.

Directions across a lens are called meridians and are numbered from 0 to 180 degrees. The 180 meridian is horizontal and the 90 meridian is vertical. The two meridians of greatest and least power are the principal meridians, and in a regular lens they are at right angles.

A toric lens has different, non-zero powers in its two principal meridians, like the surface of a rugby ball or the bowl of a spoon. It is the same thing as a sphere and a cylinder combined, and it is the lens that corrects astigmatism. A prescription is written as sphere / cylinder x axis, for example +2.00 / -1.00 x 90.

Transposition

Any toric lens can be described in two ways: with a plus cylinder or with a minus cylinder. They are the same lens. Both forms are in everyday use, and exam questions give one and ask for the other, so you need to convert between them. This is transposition, and it has three steps.

  1. Add the sphere and the cylinder, keeping their signs. This is the new sphere.
  2. Change the sign of the cylinder. This is the new cylinder.
  3. Change the axis by 90 degrees, adding or subtracting so that it stays between 0 and 180.

Worked example 1. Transpose +2.00 / -1.00 x 90. New sphere: +2.00 + (-1.00) = +1.00. New cylinder: +1.00. New axis: 90 + 90 = 180. The answer is +1.00 / +1.00 x 180. Check with a power cross. In the first form the vertical meridian (along axis 90) has +2.00 and the horizontal meridian has +2.00 - 1.00 = +1.00. In the second form the horizontal meridian (along axis 180) has +1.00 and the vertical has +1.00 + 1.00 = +2.00. The crosses match.

Worked example 2. Transpose -3.00 / +2.00 x 30. New sphere: -3.00 + 2.00 = -1.00. New cylinder: -2.00. New axis: 30 + 90 = 120. The answer is -1.00 / -2.00 x 120.

Spherical equivalent

The spherical equivalent is the single spherical power that is the average of the two principal meridians. It is the best spherical substitute for a toric prescription and is used when choosing a contact lens or an intraocular lens without astigmatic correction, and when describing how myopic or hypermetropic an eye is overall.

Spherical equivalent = sphere + (cylinder / 2)Keep the signs. The answer is the same whichever cylinder form you start from.

Worked examples. For +2.00 / -1.00 x 90 the spherical equivalent is +2.00 - 0.50 = +1.50 D. Its transposed form +1.00 / +1.00 x 180 gives +1.00 + 0.50 = +1.50 D, the same. For -3.00 / +2.00 x 30 it is -3.00 + 1.00 = -2.00 D.

Back vertex distance and effectivity

A correcting lens works by putting its focal point at the eye's far point, the place the relaxed eye is focused for (explained in the next lesson). The focal point is a fixed distance from the lens, so if the lens is moved, its focal point moves with it and no longer coincides with the far point. A different power is then needed. The distance from the back of a spectacle lens to the front of the cornea is the back vertex distance, and the change in the power needed when it alters is called effectivity.

F new = F / (1 - d × F)F is the original lens power and d the distance in metres that the lens is moved towards the eye.

Worked example 1. A hypermetrope is corrected by +10.00 D at a vertex distance of 20 mm. The lens focuses 100 mm behind itself, so the far point is 100 - 20 = 80 mm behind the cornea. A contact lens on the cornea needs a focal length of 80 mm, which is 1 / 0.08 = +12.50 D. The formula agrees: 10 / (1 - 0.02 x 10) = 10 / 0.8 = +12.50 D.

Worked example 2. A myope is corrected by -10.00 D at 25 mm. The far point is 100 mm in front of the lens, so 125 mm in front of the cornea. A contact lens needs 1 / -0.125 = -8.00 D. By formula: -10 / (1 + 0.25) = -8.00 D.

Summary

  • Lens power in dioptres is the reciprocal of the focal length in metres.
  • Surface power is (n2 - n1) / r, so steeper curves and bigger index steps give more power.
  • Convex lenses are plus and converge light, and concave lenses are minus and diverge it.
  • Thin lenses in contact add algebraically.
  • A cylinder has no power along its axis and full power at 90 degrees to it, and forms a line focus parallel to its axis.
  • A toric lens has two different principal powers and is written as sphere / cylinder x axis.
  • To transpose: add sphere and cylinder for the new sphere, change the cylinder sign, and turn the axis through 90 degrees.
  • Spherical equivalent is the sphere plus half the cylinder.
  • Moving a lens away from the eye makes its effect more plus, so contact lenses need more plus for hypermetropes and less minus for myopes.

Check yourself

Quick recall on this lesson. These are easier than the question bank.

1. What is the power of a lens with a focal length of 20 cm?
2. Transpose +1.00 / -3.00 x 180 into plus cylinder form.
3. What is the spherical equivalent of -2.00 / -1.50 x 90?
4. A myope wearing -8.00 D spectacles is fitted with contact lenses. The contact lens power will be:
Practise 8 questions on this lesson

Written for revision. It is not a source of clinical advice, and guidance changes.